r&d_banner

SLIDE Project

> > SLIDE Project

Start date : 01 nov 2013 – Duration 24 month

SLIDE : Savings at Lubricated Interfaces Deliver Efficiency

Oxford Lasers in partnership with Caterpillar UK Engines Company Ltd, Ford Motor Company Ltd, BP Castrol, and Nottingham University, work on a 2-year program of research in which the basic principles of friction will be re-examined using a novel test rig which will replicate conditions in conventional powertrains, specifically, between the piston rings and the cylinder liner walls. The consortium aims to extend the capabilities of this novel, but practical, test rig to fully validate the new friction models that will be derived.

Further, the outcome of this work will include the development of a lubricant formulated to interact with the topography and material of the cylinder and piston rings. In the long term, if all powertrain bearing surfaces are considered, it is believed that a significant improvement in fuel economy is possible by the reductions in friction that will be demonstrated in this project. This research programme is enabled by an £812,000 grant from the UK government’s Technology Strategy Board (TSB), and builds on an earlier programme, led by Ford, which was also co-funded by the TSB.  The programme of research will be performed across the consortium members’ facilites in Peterborough, Basildon, Reading, Oxford and Nottingham.

Oxford Lasers, Inc
2 Shaker Road, Unit B104, Shirley, MA 01464, USA

Oxford Lasers Ltd.
8 Moorbrook Park, Didcot, Oxon, UK, OX11 7HP

  • T: +44 (0)1235 810088 (general/service)
  • T: +44 (0)1235 814433 (micro-machining)
  • T: +44 (0)1235 812255 (imaging)
  • E: oxford.ltd@oxfordlasers.com

We also have offices in:


Choose your language:

  • English
  • French